DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer Kit

Product Description

Enjoy the power and efficiency of pneumatic nailing with the DEWALT DC618K heavy-duty 20-degree angled finish nailer kit, which can drive 16 gauge nails from 1-1/4 to 2-1/2 inches in length as rapidly as five nails per second. This cordless nailer is powered by DEWALT's 18-volt XRP batteries, and this kit comes with one battery and a 1-hour charger.

Power and Performance

The DC618K's engine design allows the tool to work as fast as you do with consistent nail penetration into both soft and hard joints. The 20-degree angled magazine (with up to 120-nail capacity) will accept DEWALT and Paslode 20-degree nails, and it has a rear-load magazine. You'll have easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches, and the contact trip lock-off allows trigger to be disabled when not in use.

Comfort and Convenience

You can select sequential operating mode to ensure precision placement of each nail or a bump operating mode that allows you to harness top speed. A 6 position dial enables you to move between applications without having to re-acquire exact depth setting. And at just 8.5 pounds, this tool is lightweight for easy maneuvering and reduced operator fatigue. This nailer also includes integrated LED lights for perfect placement in low-lit or shadowy areas.

DEWALT's XRP Extended-Life Battery System

A tool's only useful if it runs long enough to get the job done, and the DEWALT XRP extended run time batteries keep the DC618K running at full tilt. They provide up to 40 percent more run time than standard Ni-Cad batteries, and any XRP battery can be used with any 18-volt DEWALT tool, which allows you to expand your system by adding other DEWALT cordless tools (sold separately) as the demands of your job grow.

The DC618K comes with one 18-volt XRP battery and a 1-hour charger.

Warranty

This DEWALT tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase). It's also covered by DEWALT's two-year free service contract, where DEWALT will maintain the tool and replace worn parts caused by normal use--for free.

What's in the Box

DEWALT DC618K 20-degree angled nailer; 18-volt XRP battery; 1-hour charger; reversible belt hook; no-mar tip; safety glasses; operating instructions

• Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
• Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
• Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches
• Contact Trip Lock-Off allows trigger to be disabled when not in use
• Integrated LED lights for long life and durability; Top cap is impact resistant and easy to remove for troubleshooting

Most Helpful Customer Reviews

DeWalt Scores First Time Out! September 2, 2004

By M. Kellum

Color Name:NA

No, I am NOT a pro finish guy--former pro-painter guy. I have remodeled about half my house so far, so I would most likely just be a DIY guy. HOWEVER, my experience with interior painting on high-end, high-production tract home projects has made me expert in making the finished product look great no matter what (even though the popular phrase around the jobsite was "the painters will fix it").

Just picked the nailer up August 31st from H.D...

First impressions: This thing is freakin' heavy! I compared it to my Senco FramePro 702XP framing nailer (with 1 stick of 3 1/2 nails in it) and they weigh the same (about 8 pounds). My neighbor has a Senco AirFree cordless nailer, it feels like a toy in comparison to the DeWalt.

Pro's:

* Cordless! Don't have to drag out the air compressor.

* Cool headlights. Good for doing trim in darker areas.

* Shoots 16 gauge angled stick nails (Paslode nails were all I could find to fit at H.D.) Used for crown, casing, base and quarter-round shoe molding--made small, tight holes, no problems.

* Accurate electronic depth adjustment. 1-6 range, 6 setting will just countersink in 3/4 oak

* Bump-firing! Unlike Senco AirFree, you can set the DeWalt to single fire or bump. When on bump mode, it drives at a consistent depth. The motor spools up when you press the trigger, and then bam, bam, bam

* Good grip. Feels like typical DeWalt grip. Stays in you hand while sweaty, quality trigger feel.

* Spare battery. Good Dewalt charger, quality carrying case (with steel buckles instead of plastic)

Cons

* Porky.... Read more ›

it works good! September 12, 2004

By K. R. mcmahon

Color Name:NA

Just bought this tool in sept. and used it to frame several door jambs and casing. it works good. a little heavy, but a lot lighter than a compressor, hose etc. if you buy the angle gun the price of the nails are about 50% more than if you buy the other dewalt straight nailer. because at hd you can buy paslode nails for this angle gun or with the straight gun you can buy senco or porter cable nails. however the angle nailer is better for reaching into corners. As with most dewalt tools you have to use them for 15-30 days to make sure they do not fall apart or break down. but so far I recommend this gun. GUN UPDATE:>12-1-04: IT WORKS GREAT!. have done several jobs no compressors or hoses, entire house molding, casing and the gun works great. no hassels with hoses and watching out so nothing gets knocked over. I have used this gun now for 90 days and have had great success. good job dewalt.

Makes a really cool noise October 23, 2004

By Electrical Guy

Color Name:NA

I just bought this about 2 weeks ago, so I can't attest to its durability, but this is the best investment I have made in ages. I did drop from a ladder onto concrete, with no problems. I used this to hang a prehung exterior door and put down some shoe molding last week and it was great. I assumed that I would have to wait for it to charge a spring or something before I could shoot a nail, but it's ready to go as soon as you pick it up. When you pick it up and just feather the trigger, two little work lights come on and the motor spins up and it will shoot nails as fast as you pull the trigger. As with all nail guns, it won't shoot until you press the shoe against the wood. It also has a bump-firing mode where you can hold the trigger in and it will shoot a nail every time you bump it. It uses the Paslode 22 deg. nails from 1¼ -2½ . The 2 1/2" nails are great for large trim. I used them to tie doorjambs to the studs. Seems to shoot a zillion nails on a single battery. Much quieter than my air nailers. Nail depth control is the best I have seen. The case has storage room for 4 boxes of nails. The body is big, but it's very light. Get the angled model, not the straight one; they're the same price.